Does the V-6 sit forward than the V-8? How much?
Kuk
> The Paxton kit does come with the ($250) polished airhat. (Kinda
expensive
> if ya ask me.) I had originally received basically the same reply. Since
I
> used to deal with them on a professional level, I was able to get the part
> numbers and some of the "fabrication" procedures from them. It's mainly
the
> airtube since the V6 sits forward slightly. The brackets should fit...but
I
> haven't officially tested that out yet.
>
> - Bernd
>
> ----- Original Message -----
> From: <Dester223@aol.com>
> To: <dakota-truck@buffnet.net>
> Sent: Friday, April 07, 2000 12:07 AM
> Subject: Re: DML: Re: Paxton S/C, will it fit?
>
>
> > Hehe. I called paxton up alright.. here's their reply.
> >
> > "well, we haven't produced a kit for the v6 dakota yet, but the bracket
> from
> > the 360 will also fit the 318. Thanks and have a nice day"
> >
> > ah.. now I need a new "air hat" Gutting it out really weakens it.
> > -Dester
> >
> > << Not at all. You can adjust the boost on the Paxton's with a simple
> pulley
> > change. Start with 6psi though. Paxton does have a kit (which I had
> posted
> > the P/N# for a while ago) and they stated on the phone to me that "with
> > minor fabrication" it can be fitted to the V6. Main modification is
the
> > intake tube.
> >
> > Give them a call just to be safe though.
> >
> > - Bernd >>
> >
>
>
_____________________________________________
NetZero - Defenders of the Free World
Click here for FREE Internet Access and Email
http://www.netzero.net/download/index.html
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:37 EDT