On Fri, 7 Apr 2000 TEDSDAKOTA@aol.com wrote:
> Jon you you...I did'nt know you were getting the 4 barrel...
Heh heh heh! Yep, I found it on e-bay a while back and couldn't
resist. :-)
>Hows it perform ? does it sit right on the M1 ?
I'm not sure about the performance yet; its still not completely hooked
up yet. One thing I noticed though is that the air flowing through the
IAC cavity makes one heck of a sucking sound! That should be worth a
few points for intimidation factor right there... ;-)
Yep, it sits on the M1/MPI, but it needs a spacer in order for the
throttle linkage to clear the fuel rail. The air hat also needs a spacer
in order to clear the throttle linkage, and there are a few other details
that need custom fabrication/solutions and such. :-P
> Are you going to write the install up ?
Yep, absolutely. In fact, I'm planning to offer a kit for it as
well. I've got some preliminary designs in to the machine shop for the
brackets and such; I'm hoping to get the prototype pieces tomorrow.
Once I get the bugs worked out, I'll put together a kit.
-Jon-
.--- jon@dakota-truck.net -- or -- stei0302@cs.fredonia.edu ------------.
| Jon Steiger * AOPA, DoD, EAA, MP Race Team, NMA, SPA, USUA * RP-SEL |
| '92 Ram 150 4x4 V8, '96 Dakota V8, '96 Intruder 1400, '96 FireFly 447 |
`---------------------------- http://www.cs.fredonia.edu/~stei0302/ ---'
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:37 EDT