I can only take credit for passing it along, but you're welcome anyway.
I heard it somwhere, long ago.
Be careful not to make the slot too wide or cut it in the wrong place.
It has to be centered right over the adjusting nuts and only wide enough for the socket to fit easily.
Alan S.
TEDSDAKOTA@aol.com wrote:
> I wouldn't laugh, this is a perfectly acceptable way to adjust hydraulic
> lifters.
> A tip:
> If you have a old stamped valve cover lying around, you can cut a long
> slot in the top so you can get your socket in there and do the
> adjustment without spalshing oil all over.
> Alan S.
>
> Damm Alan your a genius, I have the Mopar perf cover so guess what I'm going to do to my stock ones...
> Thanks ,Ted O
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:38 EDT