You dont want you intake manifold to be "smooth as glass".
>From: "Tim Berry" <coolva1@home.com>
>Reply-To: dakota-truck@buffnet.net
>To: <dakota-truck@buffnet.net>
>Subject: Re: DML: intake work, paused =(
>Date: Sat, 8 Apr 2000 06:34:23 -0400
>
>Yea, using jB Weld to box the plenums (hell of a lot of JB weld)
>I checked the 2 I was able to complete this morning, DAMN! Its smooth as
>glass, hard as a brick, and aint goin no where...
>(not a stock intake) we cut the runners, and the little divider 2" down
>with
>a mill....
>If I can get this stuff to work, i'll take some pics =-)
>__________________________________________________________
>Tim Berry -- Chesapeake, VA
>`97 SLT 318 auto CC 2x4 LSD:
>Dual's w/Flowmaster, Homemade K&N GEN II, 2 Electric Fans
>180 T-stat, MSD 8.5 wires, Traction Bars, F&B Stage 1, Mod'd intake
>ASP Pullies (Crank/Alt), Trans Go Shift Kit, BFG 275/60's, MP Puter
>BEST 1/4 15.488 @ 86.23 MPH
>ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
>
>
>----- Original Message -----
>From: <Dester223@aol.com>
>To: <dakota-truck@buffnet.net>
>Sent: Saturday, April 08, 2000 12:56 Bright
>Subject: Re: DML: intake work, paused =(
>
>
> > Am I hearing correctly? You're JB Welding your TB to your intake? Or
>what
> > are you doing?
> > -Dester
> >
> > << Well... I get home from my friends house about 8pm and start workin
>on
> > taking my intake off due to impatientness last time i put it on... and
>was
> > gonna replace the bellypan gasket... i also had the runners cut last
>time,
> > but didnt box the plenums...
> > 1.5 hrs and I had the intake off, and started scraping the RTV... i had
>30
> > oz of JB Weld to box them suckers up with... well... I have 2 of the 4
> > done... I guess i'm gonna have to look for 30 more oz tomorrow....
> > sheesh.... =)
> > __________________ >>
>
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:38 EDT