I recently got some buckets out of a spirit. But be careful because the
rails don't mount up right, so what you'll have to do is take the mounting
rails off the bench and switch them with the ones on the buckets. And the
holes don't line up all the way on the top so you will have to drill them
out. But everything else fits perfect. Not too hard, but some work
Mark
91 cc 5spd 6er Dynomax catback 14x3 K&N Ported TB
Bucket seats Accel Super Stock coil
----- Original Message -----
From: Kyle Kozubal <grndak4x4@home.com>
To: <dakota-truck@buffnet.net>
Sent: Sunday, April 09, 2000 7:26 PM
Subject: DML: Re:
> > Hi everyone!
> >
> > I'm new to the list and I'm glad that I found it! I should be able to
add
> > to the list as much as I take because I'm an auto tech. specializing in
> > front end and alignments. I have a few question about upgrading my
> recently
> > acquired 92 Dakota LE regular cab, long box and 2WD. What are the best
> > bucket seat to use to take place of the stock bench? I've heard the
> Daytona
> > or Spirit seats work well. What center console is everyone using? My
> > Dakota doesn't have a front sway bar, do all 88-96 bars work and does
> anyone
> > have one for sale? The dealer wants $235 for the bar and $40 for the
> fight
> > mounting bracket and $210 for the left one. Couldn't believe the $210
but
> > the dealer check twice because he couldn't believe it either.
>
> First off, welcome!!!! Secondly, try to put a title or heading down when
> posting a DML message, it helps to determine the subject of the post!! I
> just swapped out the bench seat in my 93 Dakota, in favor for some nice
high
> back premium cloth bucket seats........I love them. I have no clue why I
> waited so long to do this. I bought both seats and brackets for $50. The
> stock bench seat takes about 2 minutes to take out and the buckets take
> about 15 minutes to swap in. If you the full details of how I did
> everything, just let me know. I also got a center console with the bucket
> seats, but I am going to order a Tuffy powercoated steel lockable center
> console. It costs about $165, but to me it is totally worth it, plus it is
> alot larger than the 'factory console' Good Luck!! So you know about front
> end work???.....like ball joints and tie rod ends????? Lets talk about
> replacing them!!!! I am going to replace my upper and lowers ball joints,
> and tie rods ends, which all have 120,500 miles on them.
> Kyle
> 93 Dakota 4x4 V6
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:39 EDT