What about the Torque Converter & Flex-Plate?
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
To: dakota-truck@buffnet.net
Subject: Re: DML: RE: Re: Re: DC Transmission for a 426 Hemi
Motor-Question
In a message dated 4/11/00 7:47:41 AM Eastern Daylight Time, bernd@texas.net
writes:
<< The bellhousing is different...and that's not interchangeable since it's
part of the body (one piece). If they actually have a 904 in the back of a
Hemi...it's not a factory style 904.
>>
You can buy adapter kits to bolt a SB 727 or 904 up to a BB. But you have
to
build the tranny to match the torque and HP.
Boog
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:41 EDT