Looks good Bernd, how long are the runners now?
_________________________
Jon Smith--Raleigh, NC
95 318 4x4 CC auto
www4.ncsu.edu/~jdsmith4
fast4x4@bellsouth.net
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
>
> Well, the first stage of the Intake Manifold modifications are complete.
>
> (1) The Intake Ports matched to the heads and smoothed slightly
> (2) The Intake Runners have no more casting flash on the tips and the ends
> have all been radiused
> (3) All casting flash has been removed from the top, sides, bottom, and
> inside of the Intake Manifold.
> (4) The Intake Manifold has been bead blasted (Just for clean up)
> (5) The Intake Plenum Divider has been milled down 2" below the runners.
> (6) Hi-Flow (Matched) 19# Injectors installed (Yeah....Ford Motorsport)
>
> This Friday everything is going back together and being fired up (hoping
> that all goes well the first time around).
>
>
> Pics can be found here: http://lonestar.texas.net/~bernd/DakotaPics.htm
>
> - Bernd
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:42 EDT