Officially, we don't have a true Ram-Air system. Cold air...but no Ram-Air.
- Bernd
At 11:17 AM 04/13/2000 -0700, you wrote:
>What about RAM AIR version? Either through a hood and air hat or tube to
>the front fender.
>
>----------------------------------
>Steven St.Laurent
>Test Engineer
>Test Branch, GSD, MCTSSA
>MARCORSYSCOM, USMC
>Tel: (760) 725-2296
>stlaurents@mctssa.usmc.mil
>mailto:Saint1958@home.com
>
> -----Original Message-----
>From: Bernd D. Ratsch [mailto:bernd@texas.net]
>Sent: Thursday, April 13, 2000 10:03 AM
>To: dakota-truck@buffnet.net
>Subject: RE: DML: NEED HELP PLEASE!
>
>
>Not really required. I've tested a home-built "QuickD" style and I own a
>K&N Gen-II system as well. I noticed no difference with or without the
>heat shield.
>
>- Bernd
>http://www.toycrusher.com
>
>
>At 11:41 AM 04/13/2000 -0400, you wrote:
> >I went to the site and looked at the pics. Why is there not a heat shield?
> >Or is that just for picture sake?
> >Awful expensive for a 5hp gain? Will it fit on a V6 with AC?
> >
> >Sorry about all the questions but you seem so knowledgeable.
> >
> >TIA
> >DENNIS
> >
> >-----Original Message-----
> >From: Bernd D. Ratsch [mailto:bernd@texas.net]
> >Sent: Thursday, April 13, 2000 9:31 AM
> >To: dakota-truck@buffnet.net
> >Subject: RE: DML: NEED HELP PLEASE!
> >
> >
> >
> >http://www.quickd.com
> >
> >Or.....
> >
> >You can fabricate a "Home Brew" version with simple plumbing parts from
> >Home Depot. (Personally, try the QuickD.)
> >
> >- Bernd
> >
> >At 08:00 AM 04/13/2000 -0400, you wrote:
> > >Thanx Bernd -- but where do I get one for a '99, V6?
> > >
> > >TIA
> > >Dennis
> > >
> > >-----Original Message-----
> > >From: Bernd D. Ratsch [mailto:bernd@texas.net]
> > >Sent: Wednesday, April 12, 2000 4:39 PM
> > >To: dakota-truck@buffnet.net
> > >Subject: Re: DML: NEED HELP PLEASE!
> > >
> > >
> > >
> > >Get a QuickD. You'll be much happier with it. Some of us V6'ers have
> > >tried the "Chrome Air Cleaner" (if that's what you're referring to) and
> > >found that the Intake tube works much better.
> > >
> > >- Bernd
> > >
> > >
> > >At 03:31 PM 04/12/2000 -0400, you wrote:
> > > >Ok I have a '99 SLT+, CC, 4x4, 3.9L V6 with a Flowmaster dual cat-back.
>I
> > > >am going to get a K&N FIPK, but I do not know where to get one for my
> > > >truck -- any suggestions? Also I need to know what cheap mods I can do
>to
> > > >get this snail moving, but want to keep the cost down. Any help would
>be
> > > >greatly appreciated.
> > > >
> > > >TIA,
> > > >DENNIS
> > > >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:43 EDT