Re: Exhaust Pipe Measurements

From: mike d. (miggitymike@juno.com)
Date: Fri Apr 14 2000 - 19:49:06 EDT


>>-Pipe from the factory 'y-pipe' to the catalytic converter is a large 3
inches.........<<

WOW! my collector pipe is a whopping 2.25".
Due to the botched cat install, you may be stuck with the 2.75" exhaust.
BUT... 2.75 is too big. Your low end will suffer (which will seriously
suck on the trail). 2.5" is ideal, but if you're anything like me,
spending a sh*t load of $$ on all new everything isn't in the plan =)
You could just keep the ugly stuff under there and go with a 2.5", or
lose the ugly stuff and go for the 2.75"... it's your call dude =)

-mike d.

---> Yorktown, Va.
"PROJECT 13's" ... slammed 88 Dakota: Magnum 360 swap in progress!

miggitymike@juno.com
http://members.xoom.com/dakotaperf/index.html

________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:45 EDT