Hey Aaron,
Thanks for all your help, but we've figured out the size bolt it needs --
8mm. We found this out the hard way. Jason took the bracket in to Home
Depot and went fishing in the metric area. Thanks for offering to get under
your truck, but it looks like we're all set now. Thanks again for all your
help on this. It was truly appreciated. :) :) :) :)
TTYL,
Norah
current: '98 Dakota Sport black 4x4 CC V8/5.2L/Auto
current: '95 Dakota Sport white 4x4 Reg Cab V6/3.9L/5spd
RIP: '95 Dakota Sport black 4x2 CC V6/3.9L/Auto
previous: '93 Dakota blue 4x2 CC V6/3.9L/Auto
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net]On Behalf Of A. S.
> Sent: Thursday, April 20, 2000 3:38 PM
> To: dakota-truck@buffnet.net
> Subject: RE: DML: skid plate installation on '95
>
>
> Sure thing Norah--I'll send it to Jon's address.
> --Aaron--
> 95 DSRC 4x4 V6
> Oh, and I live in Kentucky--just outside of Louisville. And not all
> businesses are closed here--we just happen to have Catholic owners :)
>
> >From: "Norah Bleazard" <nbleazard@home.com>
> >Reply-To: dakota-truck@buffnet.net
> >To: <dakota-truck@buffnet.net>
> >Subject: RE: DML: skid plate installation on '95
> >Date: Thu, 20 Apr 2000 15:01:06 -0400
> >
> >Hi Aaron,
> >
> >Thanks again. If you're going to check it tomorrow, can you send the
> >e-mail
> >to Jon Steiger's e-mail address: mailto:jon@dakota-truck.net as we'll be
> >there tomorrow. We'll be installing the Swampers as well :) <very big
> >grin>. Hopefully we'll be done in enough time to do a little offroading
> >around Jon's. :) Probably leaving here around 5:00 or 6:00am tomorrow.
> >
> >BTW, where are you located seeing as you get Good Friday off?
> Funny, it's
> >not a stat holiday in Utah, but it sure is in all of Canada. :)
> >
> >TTYL,
> >Norah
> >current: '98 Dakota Sport black 4x4 CC V8/5.2L/Auto
> >current: '95 Dakota Sport white 4x4 Reg Cab V6/3.9L/5spd
> >RIP: '95 Dakota Sport black 4x2 CC V6/3.9L/Auto
> >previous: '93 Dakota blue 4x2 CC V6/3.9L/Auto
> >
> > > -----Original Message-----
> > > From: owner-dakota-truck@buffnet.net
> > > [mailto:owner-dakota-truck@buffnet.net]On Behalf Of A. S.
> > > Sent: Thursday, April 20, 2000 9:33 AM
> > > To: dakota-truck@buffnet.net
> > > Subject: RE: DML: skid plate installation on '95
> > >
> > >
> > > Ok, that's what I'll look for then. I might get to it tonight.
> > > If not, I
> > > will tomorrow--don't have to go to work since it's good Friday.
> > > I'll let you
> > > know.
> > > --Aaron--
> > > 95 DSRC 4x4 V6
> > >
> > > >From: "Norah Bleazard" <nbleazard@home.com>
> > > >Reply-To: dakota-truck@buffnet.net
> > > >To: <dakota-truck@buffnet.net>
> > > >Subject: RE: DML: skid plate installation on '95
> > > >Date: Thu, 20 Apr 2000 08:37:23 -0400
> > > >
> > > >Thanks very much Aaron,
> > > >
> > > >The bracket I'm talking about is the triangle shaped one that
> > > has two nuts
> > > >welded on to it. These two nuts are the ones causing me grief... I
> >just
> > > >don't want to force it and accidentally strip them. Thanks again.
> > > >
> > > >Norah
> > > >current: '98 Dakota Sport black 4x4 CC V8/5.2L/Auto
> > > >current: '95 Dakota Sport white 4x4 Reg Cab V6/3.9L/5spd
> > > >RIP: '95 Dakota Sport black 4x2 CC V6/3.9L/Auto
> > > >previous: '93 Dakota blue 4x2 CC V6/3.9L/Auto
> >
> >
>
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:51 EDT