A buddy of mine is having a cam ground using the Crane 2030 spec's for a
sixer alongside of 1.6 rockers. The overlap was listed as 35 for this cam,
very smooth idle, yet fills the cylinders
quickly.
Kuk
----- Original Message -----
From: <Hvcamaro@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Saturday, April 22, 2000 1:22 AM
Subject: DML: v-6 cams
> as for messing up the computer,
> how many differnt companys make cams for sixers?
> and how many grinds are available?
> i would like to get a cam with more lift and duration,and with steeper
ramps
> (since i'll install stiffer srings).but with close,-to only a tad more,
> overlap.
> overlap is what will screw up the vacuum at lower rpms.
> i don't feel that i'll need any extra overlap do to the porting work i
plan
> on doing
> if the all the specs on the hi perf cams i find have too much
overlap..i'll
> retain the stock cam and use 1:7 rollers on it (wich should work nicely in
> conjunction with headers)
> idon't plan on racing the truck..the sixxer has enough power to do all
the
> work i need out of it, i just though a bit more power would help out some
of
> the towing and highway manners.
> and yes it's an automatic (gasp).. my next dak will have a stick though
>
_____________________________________________
NetZero - Defenders of the Free World
Click here for FREE Internet Access and Email
http://www.netzero.net/download/index.html
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:52 EDT