I'm pretty sure negative is what's used on FWD cars. The mounting surface
is out toward the outside edge.
Doug
"mike d." wrote:
> >>Would this be considered positive or negative backspacing?<<
>
> actually, all backspacing is "negative".. backspacing is the distance
> from the centerline of the wheel to the inner edge... offset is what's
> measured in "positive" or "negative". Offset is the distance from the
> mounting surface of the wheel to the centerline. To be honest, I don't
> remember which way is positive and which is negative tho... =(
>
> -mike d.
>
> ---> Yorktown, Va.
> "PROJECT 13's" ... slammed 88 Dakota: Magnum 360 swap in progress!
>
> miggitymike@juno.com
> http://members.xoom.com/dakotaperf/index.html
>
> ________________________________________________________________
> YOU'RE PAYING TOO MUCH FOR THE INTERNET!
> Juno now offers FREE Internet Access!
> Try it today - there's no risk! For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:53 EDT