positive offset is from the centerline to the outside
of the truck....negative is from the centerline in
towards the suspension.
most 8" have a 12mm to around 25mm offset for the
dakotas...or 5" to 5.5" backspacing.
not sure about the 15x6, though...I have a set at home
that are off the truck...I will look in a couple of
weeks.
hope this helps.
Gregg
92 V6 CC
--- "mike d." <miggitymike@juno.com> wrote:
> >>Would this be considered positive or negative
> backspacing?<<
>
> actually, all backspacing is "negative"..
> backspacing is the distance
> from the centerline of the wheel to the inner
> edge... offset is what's
> measured in "positive" or "negative". Offset is the
> distance from the
> mounting surface of the wheel to the centerline. To
> be honest, I don't
> remember which way is positive and which is negative
> tho... =(
>
> -mike d.
>
> ---> Yorktown, Va.
> "PROJECT 13's" ... slammed 88 Dakota: Magnum 360
> swap in progress!
>
> miggitymike@juno.com
> http://members.xoom.com/dakotaperf/index.html
>
>
________________________________________________________________
> YOU'RE PAYING TOO MUCH FOR THE INTERNET!
> Juno now offers FREE Internet Access!
> Try it today - there's no risk! For your FREE
> software, visit:
> http://dl.www.juno.com/get/tagj.
>
__________________________________________________
Do You Yahoo!?
Send online invitations with Yahoo! Invites.
http://invites.yahoo.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:53 EDT