> Anyone know what size the fill plug is on the NP231? Wanted to remove it
to
> check the fluid level and didn't have a socket big enough. Fluid level
> should be even with the bottom of the fill hole when cold, right?
> Thanks for any and all help!
Aaron,
I cannot use a socket to get to mine, there just isnt enough room between
the tcase and the frame crossmember. To only way I can get to mine is with a
open/boxed(long) wrech, I want to say either 30 or 32MM. I used to just go
to Sears, pay $20 for the unusually large wrech and return it when I was
done with it, since this is the only thing I would use that big of a wrench
for. I would suggest looking at local flea markets/swap meets, if you dont
want to pay the $20. I found a used Craftsman wrench at one for $5. Yes the
ATF should be at the bottom of the fill plug.
Kyle
93 Dakota 4x4 v6
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:54 EDT