The ATI kit is now supplied with a Intercooler and a hefty price for
4150.00. But then with a 8-10 PSI boost I expect a whopping 375-390 rear
wheel HP. From here the 4.7 or 360 guys will need to change the fuel pump
and injectors. The Vortech V-2 did away the noise and retain the cooler
though. Yes! There are some trade offs.
-------------------------------------------
Steven St.Laurent
Test Engineer
Test Branch, GSD, MCTSSA
MARCORSYSCOM, USMC
760-725-2506 (DSN 365-2506)
Work:mailto:stlaurents@mctssa.usmc.mil
Home:mailto:saint1958@home.com
-----Original Message-----
From: Hausheer, Geoffrey [mailto:geoffrey.hausheer@intel.com]
Sent: Tuesday, April 25, 2000 8:23 AM
To: 'dakota-truck@buffnet.net'
Subject: RE: DML: supercharger price???
As a note. I saw pretty serious knock on my 6lb powerdyne especially whe it
was hot out). Going to the 24lb injectors fixed this, but it shows that
even at 6lbs (and I was only seeing about 4.5 of actual boost) you can get
pretty close to the edge. For any blower setup you should probably get
larger injectors and an ignition-retard unit (which I am still lacking).
Also when I was trying to decide on a blower, I decided against the ATI
because I was told they run REALLY hot (like you need to have an intercooler
to use them). I went with the Powerdyne because it was quiet (compared to
the Vortech) and a really easy install (doesn't need oil), but were I to do
it over I'd probably seriously consider the Kenne Belle (which starts making
boost at really low RPMS and comes with a nice knock sensor/retard unit).
Of course it is about $1k more though.
.Geoff
'98 318 CC 4x4
-----Original Message-----
From: Stlaurent Mr Steven [mailto:STLAURENTS@mctssa.usmc.mil]
Sent: Tuesday, April 25, 2000 9:59 AM
To: 'dakota-truck@buffnet.net'
Subject: RE: DML: supercharger price??? Pat
After talking to the folks from ATI, for 360, 318, and the 289, you should
use the 8-10 psi version for optimal gains, The 12plus range requires some
serious modifications. This is why sometime being cheap in price is not
always good.
-------------------------------------------
Steven St.Laurent
Test Engineer
Test Branch, GSD, MCTSSA
MARCORSYSCOM, USMC
760-725-2506 (DSN 365-2506)
Work:mailto:stlaurents@mctssa.usmc.mil
Home:mailto:saint1958@home.com
-----Original Message-----
From: Patrick Delgado [mailto:dadoctah@vitelcom.net]
Sent: Monday, April 24, 2000 9:25 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: supercharger price??? Pat
6 psi centrifugal.
Dr. Pat
Stlaurent Mr Steven wrote:
>
> What boost version of the PowerDyne are they selling? Root or
centrifuge?
>
> -------------------------------------------
> Steven St.Laurent
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:55 EDT