Re: EMBLEM

From: Preacher (preacher@carolina.rr.com)
Date: Wed Apr 26 2000 - 17:33:25 EDT


Why bother? You can buy just the Magnum part from Dodge (as they have on th
4cyl Daks) Easier than modifying your own and it will mount as stock....
just a thought!

===============================================
Preacher
Webmaster: http://www.bastaards.org
Owner: http://www.onelist.com/community/BASTAARDS
Columnist: http://www.wfthecoliseum.com
===============================================
----- Original Message -----
From: hoegen <hoegen@kersur.net>
To: <dakota-truck@buffnet.net>
Sent: Wednesday, April 26, 2000 2:42 PM
Subject: Re: DML: EMBLEM

> Based on what you've done, can the same be done with the word "magnum"
> remaining and the V8 removed?
> -----Original Message-----
> From: Todd Flummer <mustang@netunlimited.net>
> To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
> Date: Wednesday, April 26, 2000 2:24 PM
> Subject: Re: DML: was "v8 emblem was: got my truck on the road" now EMBLEM
>
>
> >Well the custom emblem was my creation. I took the factory emblem off
> >(which is actually two pieces) the emblem and a black piece that is
gluded
> >to the back of it. I seperated the two of them cut the Magnum off the
> >bottom. When you remove the emblem it will leave two holes in the fender
> >but if you postion the new CUSTOM emblem correctly you can cover both of
> >them. Then I just added some double faced 3M tape and stuck them there.
> >
> >Todd
> >Mustang@netunlimited.net
> >www.netunlimited.net/~mustang/
> >
>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:56 EDT