> What is the difference from the old TB in mm and the new modified version?
Steven
The bores on mine are just going to be cleaned up and opened up slightly,
nothing radical. I spoke with Tony, as he said the 'old-style' TBs get the
same work done to them as the new style TBs. This basically means : "All
throttle bodies have their air horns removed. The top and bottom surface are
milled flat. Depending on which throttle body is chosen, the bores are
either opened up to desired size or bored out just enough to clean up the
casting to insure clean air flow. They all receive brand new custom made
stainless steel shafts and brand new custom made brass blades. Throttle Body
kits include a new gasket, button head bolts, and the new longer S bolt. If
you currently are using a S bolt, it will be too short since the top of the
TB is milled flush."
Kyle
93 Dakota 4x4 V6
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:11 EDT