>> And/Or would it be worth getting the Magnum heads that cost more
not to mention the cost of the mods to make it work. All suggestions are
appreciated.<<
I had contemplated this mod, and almost went through with it. I know they
will fit, but there is some machining you have to do to get them to bolt
up. As far as I know, the heads bolt on fine, but there is some issue
with the intake manifold bolts or something. Like, they go in at a 90
degree angle on premags, and they go in at 45 degrees on magnums... I
don't know for sure, it's been a long time since I read it.... all I know
is, you have to get the intake machined...
here is a list of stuff you'll need for sure:
-Magnum Heads
-Valve covers to fit a magnum
-Magnum pushrods (you NEED these!!! premags have self oiling heads,
magnum heads are oiled via the pushrods)
-intake manifold machine work
-Magnum exhaust manifold & y-pipe
it's seems like a lot of stuff, but I hear Magnum heads make maaaaad
power on non-magnum engines
-mike d.
----->Yorktown, Va.
PROJECT 13's!! ... dumped 88 Dakota w/MAGNUM 360 swap in progress!
http://members.xoom.com/dakotaperf/index.html
miggitymike@juno.com
________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:13 EDT