Tim, I was at Richmond Dragway this Sunday, it was 95 degrees and 50%
humidity sunny, I was running 14.7's and I usually run high 14.50's low
14.60's. Way too hot and humid for quick times, so the weather was hurting
me about .10 +/- seconds! track was slick too, short times were in the high
1.9's normally low 1.9's.
__________________________________
Matt -- Mechanicsville, VA Y2K-HEMI
`00 Sport Plus 4.7L 5spd. 9 1/4 3.92 LSD
RC 2x4 Homemade air intake W/ K&N open element,
Traction Bars, Spring clamps, Mobil 1
BEST 1/4 14.57 @ 91.09 MPH (Hoosier Slicks)
BEST 1/8 9.19 @ 72.58 MPH (Hoosier Slicks)
BEST 60' 1.90
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
-----Original Message-----
From: Tim Berry [mailto:coolva1@home.com]
Sent: Saturday, May 06, 2000 10:39 AM
To: dakota-truck@buffnet.net
Subject: DML: track times...
Okay folks... heres the rundown of the times with the cutout and with out
it,..
Best run with the street exhaust (remember it was 78 degrees)
R/T .592
60' 2.294
330 6.674
1/8 10.298@68.12
1000 13.434
1/4 16.128@83.46
Now, with the cutout open (loud)
R/T .525
60' 2.224
330 6.517
1/8 10.057@69.76
1000 13.134
1/4 15.775@85.13
Has anyone else found what kinda difference the temp makes on the times?
Because I was bracket racing, I was never able to let the truck cool off...
my intake would burn my finger still when it was time for the next run... =/
anyone know of a temp calculator or anything on the net? my 15.4 run was
when the temp was in the upper 50's i think
__________________________________________________________
Tim Berry -- Chesapeake, VA
`97 SLT 318 auto CC 2x4 LSD:
Dual's w/Flowmaster, Homemade K&N GEN II, 2 Electric Fans
180 T-stat, MSD 8.5 wires, Traction Bars, F&B Stage 1, Mod'd intake
ASP Pullies (Crank/Alt), Trans Go Shift Kit, BFG 275/60's, MP Puter
Edelbrock Headers/Y-pipe, Exhaust cutout B4 cat
BEST 1/4 15.488 @ 86.23 MPH
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:13 EDT