Thanks, Bob -I installed it last night. Everything in loom, every
connection soldered, what a deal. Here's what went in:
MSD6A PN6200
MSD harness PN8773
MSD noise filter PN8830
MSD 8.5 superconductor wires PN 3218-9
Autolite 5224 plugs set at 0.050 gap.
Echlin cap MO29
Echlin rotor M026
I put it on the passenger side wheel well, I'll take some pics later on.
No difference so far, but it seems to run really well - some fool in a
v-6 rustang tried me out last night. He must have been soooo embarrased
to be beaten by a truck (really badly), especially with his girlfriend
in the passenger seat!
Later dudes,
Cale
98cc318sporty
Bob Tom wrote:
>
> At 09:11 PM 5/10/00 -0500, you wrote:
> >Thanks Jon -Yuda man! Cale
> >
> >Jon Smith wrote:
> >> Accel pn: 140021
>
> You'll also need the adapter harness since you've got a '98.
>
> Bob. Ont, Canada. '97 Dakota CC, 5.2L, 4x2, 3.92 SG, auto., 4350 lb.
> RWHP: 226.2 (corrected) 231.2 (measured)
> RWTQ: 332.5 (corrected) 340.0 (measured)
> PB: 14.857 @ 91.67
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:17 EDT