In a message dated 5/9/00 1:02:36 PM Mountain Daylight Time,
miggitymike@juno.com writes:
<< Hey Greg,
I was fixin' to measure my dak at the fenderwells today, but I thought of
something:
there are 2 factors that will make my measurements not accurate
depictions of what the same kit will do on your truck.
#1- I have a V6. The V8's get more drop in the front due to the weight
difference
#2- I have a longbed, so the back of mine is lower than yours would be.
My measurements say I got 3 1/8" of drop up front, and 5 7/8" of drop out
back. This puts my rear 1/4" lower than the front, which the 360 will
compensate for (Eibach says the V8 will drop the truck another 1/2 to
3/4").
I highly recommend the Western Chassis kit!! If not for the Eibach
Springs, then for the adjustable hangers.
-mike d. >>
OK cool, those number helped, but what I would really like, is if you could
measure up from the ground to the bottom of you fender lip, that's thew
measurement that I need to know, About the whole V6/V8 thing, yeah I know
about that, I am jsut trying to get a rough estimate!
Greg
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:17 EDT