Cale,
I recall from one of your earlier posts that you were not using the Blaster
3 because of difficulty finding a place to mount the coil? Don't know about
the Gen III's (mines a '95, 318) but I put my coil on the firewall, about
6-8 inches from the Distributor. Makes it an easy run to the cap, plus you
just leave your original coil in the stock location. Allows you to switch
back quick&easy if you ever need to.
Later,
Duff
'95 SLT 4x4 CC 318 4spd/OD - 3.55 LSD
MSD 6AL - MSD Blaster Coil - HiPo SBEC
MSD 8.5 wires - K&N FIPK - F&B Stage I TBI
Thorley Headers - Gibson Catback Exhaust
-----Original Message-----
From: Cale [mailto:vencomatic@ameritech.net]
Sent: Friday, May 12, 2000 9:26 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: CALE!! --> was:MSD
Hey Mike,
I think all put together it came out to roughly 300 bucks
6a box 130
blaster 3 coil 31.99 <for sale - I didn't use it
coil bracket 7.99 <same
wire set 58.99
universal harness 8873 16.99
noise filter 25.99
t-shirt "You lift, you lose" (optional)
cap and rotor together were about 15 bucks
plugs were about 1.00 each
tube of dilectric grease, wire loom, connectors......25.00
hope this helps - I bought it all from Jeg's.
Later,
Cale
98cc318sporty
mike d. wrote:
>
> >>MSD6A PN6200
> MSD harness PN8773
> MSD noise filter PN8830
> MSD 8.5 superconductor wires PN 3218-9
> Autolite 5224 plugs set at 0.050 gap.
> Echlin cap MO29
> Echlin rotor M026<<
>
> about how much did all this set you back? Looks like a good mod for "Da'
> Project"
> thanx
>
> -mike d.
>
> -----> gettin' hassled in Yorktown, Virginia
> PROJECT 13's!! 88 Dakota that's slammed and gettin' a 360 Magnum!
>
> miggitymike@juno.com
> http://members.xoom.com/dakotaperf/index.html
>
> ________________________________________________________________
> YOU'RE PAYING TOO MUCH FOR THE INTERNET!
> Juno now offers FREE Internet Access!
> Try it today - there's no risk! For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:17 EDT