Thanks, Duff - lemme go dig into my Dak.....hey this coil is roughly the
size and shape of a beer bottle and must be mounted vertically...
I just looked again and there's just no way to get it onto the firewall
- the only option really might be to mount in on the pass. side inner
fender lip, but that's even marginal and may require a longer coil wire.
I'm thinking that I'll get the accel coil and be done with it.
Thanks again,
Cale
98cc318sporty "look ma, no decals!"
brian.duffey@intelsat.int wrote:
>
> Cale,
> I recall from one of your earlier posts that you were not using the Blaster
> 3 because of difficulty finding a place to mount the coil? Don't know about
> the Gen III's (mines a '95, 318) but I put my coil on the firewall, about
> 6-8 inches from the Distributor. Makes it an easy run to the cap, plus you
> just leave your original coil in the stock location. Allows you to switch
> back quick&easy if you ever need to.
>
> Later,
>
> Duff
> '95 SLT 4x4 CC 318 4spd/OD - 3.55 LSD
> MSD 6AL - MSD Blaster Coil - HiPo SBEC
> MSD 8.5 wires - K&N FIPK - F&B Stage I TBI
> Thorley Headers - Gibson Catback Exhaust
>
> -----Original Message-----
> From: Cale [mailto:vencomatic@ameritech.net]
> Sent: Friday, May 12, 2000 9:26 AM
> To: dakota-truck@buffnet.net
> Subject: Re: DML: CALE!! --> was:MSD
>
> Hey Mike,
> I think all put together it came out to roughly 300 bucks
> 6a box 130
> blaster 3 coil 31.99 <for sale - I didn't use it
> coil bracket 7.99 <same
> wire set 58.99
> universal harness 8873 16.99
> noise filter 25.99
> t-shirt "You lift, you lose" (optional)
> cap and rotor together were about 15 bucks
> plugs were about 1.00 each
> tube of dilectric grease, wire loom, connectors......25.00
>
> hope this helps - I bought it all from Jeg's.
>
> Later,
> Cale
> 98cc318sporty
>
> mike d. wrote:
> >
> > >>MSD6A PN6200
> > MSD harness PN8773
> > MSD noise filter PN8830
> > MSD 8.5 superconductor wires PN 3218-9
> > Autolite 5224 plugs set at 0.050 gap.
> > Echlin cap MO29
> > Echlin rotor M026<<
> >
> > about how much did all this set you back? Looks like a good mod for "Da'
> > Project"
> > thanx
> >
> > -mike d.
> >
> > -----> gettin' hassled in Yorktown, Virginia
> > PROJECT 13's!! 88 Dakota that's slammed and gettin' a 360 Magnum!
> >
> > miggitymike@juno.com
> > http://members.xoom.com/dakotaperf/index.html
> >
> > ________________________________________________________________
> > YOU'RE PAYING TOO MUCH FOR THE INTERNET!
> > Juno now offers FREE Internet Access!
> > Try it today - there's no risk! For your FREE software, visit:
> > http://dl.www.juno.com/get/tagj.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:17 EDT