Hard water spots? Yur gonna gag... but I used vinegar in with the soapy water.
About a 40/60 vin/h2o mix. I know... it stinks....but it'll cut the water
spots. Hard water is a terrible problem here in Phoenix. I have to make sure I
wash the truck in the shade and then dry it off with towels immediately after
getting it all done. The heat is one thing, but add 8% humidity to that and
the freeakin truck drys before your eyes. I hose the whole thing off one last
time just before towelling it off. I'm going to put a hose bib on the output
side of my water softener soon...
----- previous post -----
Date: Sun, 21 May 2000 11:34:15 -0700
From: "Ken Keilman" <kman940@uswest.net>
Subject: DML: Re: Re: How do I get wax off the door handle?
Does that work for hard water spots as well?
- ----- Original Message -----
From: "Tim J Koth" <Tim.J.Koth@aexp.com>
To: "dakota-truck%buffnet.net" <dakota-truck@buffnet.net>
Sent: Saturday, May 20, 2000 10:47 PM
Subject: DML: Re: How do I get wax off the door handle?
> Yes WD-40 does work. I've also had good luck with an old soft bristle
tooth
> brush and soapy water to get it off.
> I've found a way to help prevent it from being a problem too. I simply put
> Turtle Wax Formula 2001 (or Armor All, or New Vinyl, whatever floats yur
> boat) on BEFORE doing the wax job. Then if you get some on the plastic
parts
> it's much easier to get off afterwards. YMMV
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:22 EDT