Jeff,
Welcome. About three weeks ago I got a Snug-Top put on my truck (it is
the same as your's except for the rear gears). When they installed the
shell they removed the rear driver's side lens and tapped into the brake
light there. If you feel around in the inside rear top corner of the bed
you'll find that there is a gap between the rail and bed. They ran the
wire for the third brake light thought that gap. If you do it yourself
be carefull to not tap into the blinker wire. Also, at this point I
would NOT recommend a Snug-Top. Good luck.
________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:28 EDT