At 10:35 PM 5/31/00 -0400, you wrote:
-----------------------------------------------------------------------------
>At 09:09 AM 6/1/00 -0700, you wrote:
>[...]
>> > Also check the distributor hold down clamp,
>> > I had to grind it down a lil for some weird reason it was barely touching
>> > the manifold.....
----------------------------------------------
>>Thanks for the tip here. I see Rich W. just grinded a bit off the
>>manifold to clear that area. I kinda like that idea beter, sounds
>>easier. I'll cross this bridge when I get to it, maybe mine will
>>clear ok..
----------------------------------------------------------------------------
> FWIW, I didn't have any clearance problem at all on my '96.
> -Jon-
No clearance problem with the '97 as well. It looked like that there
might be with the distributor &/or its hold down clamp but it cleared.
Bob
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:38 EDT