I thought they were solid if not then watch it fold in the middle. He He.
Damn that HEMI motor, it folded my sway bar....<chuckle>
-------------------------------------------
Steven St.Laurent
Test Engineer
Test Branch, GSD, MCTSSA
MARCORSYSCOM, USMC
760-725-2506 (DSN 365-2506)
Work:mailto:stlaurents@mctssa.usmc.mil
Home:mailto:saint1958@home.com
-----Original Message-----
From: Eng, Kenneth [mailto:kenneth.eng@datajump.com]
Sent: Friday, June 09, 2000 11:06 AM
To: 'dakota-truck@buffnet.net'
Subject: DML: RE: RE: RE: Date: Fri, 9 Jun 2000 08:33:24 -0700
Is the Hotchkis front sway bar for the Dakota solid or hollow?
Ken
-----Original Message-----
From: Stlaurent Mr Steven [mailto:STLAURENTS@mctssa.usmc.mil]
Sent: Friday, June 09, 2000 1:40 PM
To: 'dakota-truck@buffnet.net'
Subject: DML: RE: RE: Date: Fri, 9 Jun 2000 08:33:24 -0700
Hmm! I would compare the diameter, angles, material use, and bushings. Now
the shocks, well, Bilstein are the best. Hotkris has dramatically retuned
them for the truck version and Sam is right. The BEST!!!!
-------------------------------------------
Steven St.Laurent
Test Engineer
Test Branch, GSD, MCTSSA
MARCORSYSCOM, USMC
760-725-2506 (DSN 365-2506)
Work:mailto:stlaurents@mctssa.usmc.mil
Home:mailto:saint1958@home.com
-----Original Message-----
From: Sam Parthemer [mailto:srp@home.com]
Sent: Friday, June 09, 2000 10:35 AM
To: dakota-truck@buffnet.net
Subject: DML: RE: Date: Fri, 9 Jun 2000 08:33:24 -0700
Hothckis makes a set of sway bars for about $500 that will dramatically
improve the handling of you QC... Along with a good set of shocks, you'd
have a great handling ride, and still stock oem height.
Sam
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net]On Behalf Of Ronald Wong
> Sent: Friday, June 09, 2000 8:33 AM
> To: dakota-truck@buffnet.net
> Subject: DML: Date: Fri, 9 Jun 2000 08:33:24 -0700
>
>
> I need some info and advice. My Dakota came with a front sway bar (listed
> as stabilizer bar?). Am I correct so far? What I would like to know is,
> should I add/change to aftermarket bars? front and rear? What
> are the ride
> differences? A lot stiffer? little? Costs?
>
> Thanks all,
> Ron
> 00 SLT QC 4X2 5.9 3.55 LSD
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:41 EDT