Sounds like a plan.
--- "Brown, Mike (CAD)" <MBrown@ciena.com> wrote:
> Red plasti-cote enamel spray from pep-boys should do
> the trick with a coat or two of clear coat.
> Mask off all the areas you don't want sprayed.
> You'll get a better look from spray than with
> a brush.
>
> -Mike Brown
> Pasadena, MD.
> 97-Dakota Club Cab,5.2L, 4X4, 7" Lift, 35"x12.50"
> BFG A/T.
>
> http://www.geocities.com/mbrowwwn/index.html
>
>
> -----Original Message-----
> From: Looper [mailto:davidalooper@yahoo.com]
> Sent: Wednesday, June 14, 2000 10:09 AM
> To: dakota-truck@buffnet.net
> Subject: Re: DML: Touch Up Paint
>
>
> I've got the stock SLT rims and have been thinking
> about painting the Rams head in the centers Flame
> Red
> like the truck. The center inserts are plastic. Do
> you think the touch up paint would work?
>
>
> --- Luke White <lukewhite@emeraldis.com> wrote:
> > I'm a little behind, so I apologize if this has
> been
> > mentioned already.
> > Eastwood makes a really nice touch up kit that
> > includes very small brushes,
> > a "sanding spool" with very fine sanding disks,
> wax
> > remover, a rust removing
> > pencil, and a final polish. Used properly, it
> does
> > a fantastic job - it
> > does take some practice and it costs about $50
> IIRC.
> >
> > Later,
> >
> > Luke
> >
> > <snip>
> > Would someone give me some ideas on how to touch
> up
> > paint nicks from other
> > cars' doors? I have the factory touch up paint.
> It
> > comes with a brush that
> > looks way too big. Someone suggested a toothpick.
>
> > Any other ideas.
> > Thanks, greatly appreciated.
> >
> > Ron
> > 00 SLT QC 4X2 5.9 3.55 LSD
> > <snip>
> >
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Photos -- now, 100 FREE prints!
> http://photos.yahoo.com
__________________________________________________
Do You Yahoo!?
Yahoo! Photos -- now, 100 FREE prints!
http://photos.yahoo.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:45 EDT