Re: Re: DML Digest V4 #2103

From: Looper (davidalooper@yahoo.com)
Date: Wed Jun 14 2000 - 16:46:58 EDT


That's where I got the idea...
You filled in the entire indention?

--- Charles Wyman <cewyma@Roushind.com> wrote:
> I did exactly this to my center caps. Check out my
> pics on my website listed below. All I did was get
> the small touch up paint that has the built in
> brush. Fill in the indented rams head and don't
> worry if you get any outside the lines. You can get
> a little sloppy with it, just make sure the bottom
> and sides of the indention are fully covered. After
> you have if filled in completely take a rag with
> some nail polish remover and rub off the excess
> paint, trying not to let the rag protrude into the
> indented ram symbol. Do this before the paint is
> dry! After that I coated the painted areas with
> clear coat the same way. It worked great and looks
> great. It took me about 1.5 hours to do this. The
> first one took the longest because I had to get a
> technique down. Make sure you let them dry for
> about 24 hours before you drive with them on. I've
> got nearly 6000 miles on my D since I did that and I
> clean my rims using a rim cleaner chemical weekly
> and have not had one problem w!
> ith paint peeling or flaking. Good luck.
>
>
______________________________________________________________
> Chuck
> '00 Flame Red Durango SLT+
> 5.9L, 4x4, 3.92 LSD, R/T wheels (Goodyear Eagle GT
> II 275/60/R17)
> 2.5" Dynomax Magnum Race Series cat back exhaust
> Quick-D T-body & intake
> Mopar Performance PCM (on back order)
> Lund Eclipse 4 door window vents custom painted by
> Caribbean Customs
> MTX Thunderform w/ built in amp (on back order)
> best 1/4 mile (stock): 16.08 @ 84 mph
> www.geocities.com/papa_c_d/
> cewyma@roushind.com
>
______________________________________________________________
>
> - -----Original Message-----
> From: Looper [mailto:davidalooper@yahoo.com]
> Sent: Wednesday, June 14, 2000 10:09 AM
> To: dakota-truck@buffnet.net
> Subject: Re: DML: Touch Up Paint
>
>
> I've got the stock SLT rims and have been thinking
> about painting the Rams head in the centers Flame
> Red
> like the truck. The center inserts are plastic. Do
> you think the touch up paint would work?
>

__________________________________________________
Do You Yahoo!?
Yahoo! Photos -- now, 100 FREE prints!
http://photos.yahoo.com



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:45 EDT