Steve,
I am running the Motorsport injectors in my '96 318. No problem running
lean what-so-ever. I have one injector flowing on the heavy side. Going to
recheck and possibly replace it, but other than that, they are fine.
Rich - Ashburn ,VA
-----Original Message-----
From: steve reed [mailto:bby248@hotmail.com]
Sent: Friday, June 16, 2000 11:36 PM
To: dakota-truck@buffnet.net
Subject: DML: ford moto injectors...stock pressure?
HELP!!!!!!!!!!
I have a bad hessitaion problem with my new 5.2 that I have installed.
this is in the low RPM range in all gears.....like 1800-2000.
I had this problem before i changed engines.....but it is more aparent now.
I used the 24# ford motosports inj. for the new one. Changed the
TPS....had the truck to Dodge for a PCU scan...found nothing. Plugs look
like that it is a lean fuel mix.
so my question is......to anyone out there with a 95 5.2 had this problem?
Or anyone that has changed to the ford inject had this problem?
thanks
the "X-MAN"
PIRCH "xcitmt"
ICQ 39088158
Steve (new motor a week old)
95 CC 5.2 SLT Mopar....headers(ceramic coated),Mopar wires,Mopar 360 P&P
heads,Mopar cast valve,Mopar cast air cleaner,Mopar pulleys,R/T cam. 30 over
forged pistons,Centerline Aztec,
3" pipes(no cat),painted-smoothed bumper painted grill,Sir Michael's
rollpan. Pioneer 825,Cerwin Vega spkrs,Rockford Amps. 2 DML
stickers!!
Only run:
13.002 1000ft
79.7 mph 1000ft
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:48 EDT