Sorry, maybe I wasn't clear, they are 2 inch coil
spring spacers for the front. Also my dak is only 2
wheel drive, so I don't believe that I have torsion
bars. Any suggestions?
--- "Brown, Mike (CAD)" <MBrown@ciena.com> wrote:
> I have 3" spring blocks in the rear of my Dak. The
> Rancho kit came with 2" blocks,
> but I wanted more lift, so I swapped them out for 3"
> blocks and cranked up the torsion
> bars in the front. You may have to get longer
> U-Bolts.
>
> -Mike Brown
> Pasadena, MD.
> 97-Dakota Club Cab,5.2L, 4X4, 7" Lift, 35"x12.50"
> BFG A/T.
>
> http://www.geocities.com/mbrowwwn/index.html
>
>
> -----Original Message-----
> From: Seth Hollander [mailto:sethmetal@yahoo.com]
> Sent: Thursday, June 22, 2000 1:21 PM
> To: Dakota Mailing List
> Subject: DML: Spring spacers
>
>
> I have a 94 2wd cc 318 and want a little lift. I
> have
> seen to inch leveling spacers for the dak. Has
> anyone
> tried this? What are the advantages and
> disadvantages?
> I don't want to take harm my truck by doing this.
> Another thought was to get larger springs, but I am
> not sure where I could get them.
>
> __________________________________________________
> Do You Yahoo!?
> Send instant messages with Yahoo! Messenger.
> http://im.yahoo.com/
__________________________________________________
Do You Yahoo!?
Send instant messages with Yahoo! Messenger.
http://im.yahoo.com/
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:51 EDT