Over 100 Dakota I know off have those handles on www.copartfinder.com
-------------------------------------------
Steven St.Laurent
Test Engineer
Test Branch, GSD, MCTSSA
MARCORSYSCOM, USMC
760-725-2506 (DSN 365-2506)
Work:mailto:stlaurents@mctssa.usmc.mil
Home:mailto:saint1958@home.com
-----Original Message-----
From: Alex Ross [mailto:ajross50@mindspring.com]
Sent: Wednesday, July 05, 2000 2:40 PM
To: dakota-truck@buffnet.net
Subject: DML: Re: Oh $hit handles
I installed a passenger side "Oh $hit" handle on my 97 Dak. The total cost
for parts from my local dealer was about $45. This included a new A-pillar
molding, handle and screws and threaded bushings for the screws. I had to
ask for parts from a 98 or newer. The holes were already in the A-pillar on
my truck. However, they were a hair to big for the threaded bushings to fit
into. So, I JB Welded the threaded bushings in, and screwed the handle right
in. This was over a year and a half ago and it still works great.
Alex
97 CC Sport V8 5spd
----- Original Message -----
From: Dan Jones <amishpimp93@hotmail.com>
To: <dakota-truck@buffnet.net>
Sent: Wednesday, July 05, 2000 5:33 AM
Subject: DML: Oh $hit handles
> One thing that id like to put on my dak are the handles that go above the
> top of the doors on the ceiling to grab onto in like a tight turn and such
> (for the passenger side). Are there any years that they were put on in
any
> dakota's? Has anyone installed them on thiers? I would like to but what
> kind of things would you have to do? Is it possible? Its a 97'. thanks
>
> www.black-dakota.com
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:52:32 EDT