The tranny is in the same location. It will bolt up just fine
-mike d.
----> Yorktown, Va.
PROJECT 13's!! --->slammed 88 Dakota, 360 swap in progress!!
miggitymike@juno.com
http://surf.to/Project13s
On Fri, 7 Jul 2000 14:47:00 EDT DICEMAN469@aol.com writes:
> Can someone with a GENII dak pleeeease go outside and measure their
> engine
> block for me? I need to know the distance between the back of the
> engine
> block and the firewall. I'm trying to find out if the V8 and the V6
> sit in
> the same location in the engine compartment. I'm looking at a V8
> swap (AGAIN)
> and I'm thinking about trying to hook it up to the V6 tranny. I know
> it
> probably won't hold up for long, but it will relieve me from having
> to do the
> entire drivetrain swap in one shot.
> Also if you can let me know if you have the manual or the auto.
________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:52:34 EDT