Nope last pass was 100 shot (13.82).
Todd
Mustang@netunlimited.net
www.netunlimited.net/~mustang/
----- Original Message -----
From: Stlaurent Mr Steven <STLAURENTS@MCTSSA.USMC.MIL>
To: <dakota-truck@buffnet.net>
Sent: Tuesday, July 11, 2000 11:40 AM
Subject: DML: RE: Re: RE: attn.Tim B. and Injectors installed... was
Richmond D'way
> Todd, what was your previous time before the 150HP NOS shot?
>
> -------------------------------------------
> Steven St.Laurent
> Test Engineer
> Test Branch, GSD, MCTSSA
> MARCORSYSCOM, USMC
> 760-725-2506 (DSN 365-2506)
> Work:mailto:stlaurents@mctssa.usmc.mil
> Home:mailto:saint1958@home.com
>
>
> -----Original Message-----
> From: Todd Flummer [mailto:mustang@netunlimited.net]
> Sent: Tuesday, July 11, 2000 8:23 AM
> To: dakota-truck@buffnet.net
> Subject: DML: Re: RE: attn.Tim B. and Injectors installed... was
> Richmond D'way
>
> You guys let me know when you plan to race again and I'll come up that
way.
> I plan on dropping as much weight as I can and maybe even going with the
big
> 150 shot. I think that would put me low to mid 13's.
>
> Todd
> Mustang@netunlimited.net
> www.netunlimited.net/~mustang/
>
> ----- Original Message -----
> From: Barret, Matt <MATT_BARRET@earthtech.com>
> To: <dakota-truck@buffnet.net>
> Sent: Tuesday, July 11, 2000 9:29 AM
> Subject: DML: RE: attn.Tim B. and Injectors installed... was Richmond
D'way
>
>
> > yea, It will be close to the same, but I bet you'll see about a 2 mph
drop
> > or so in trap speed if the 60' times drop by .2's or more. I've got a
> > spreadsheet of 70+ runs that you can compare all the info and see the
MPH
> > fluctuate. I'm talking about strictly 60'. Your Bro spinning 1st and
2nd
> > was probably more along the lines of 100 feet or more, that will
> definitely
> > kill your ET and MPH!! Traction problems for our trucks is only in the
> 1st
> > 60', generally no problem with traction after 60' unless your on some
real
> > bad radials :).
> >
> > Yea, bring that ride up here to Richmond Tim and we'll put the
> > Hoosier-(daddys) on there and watch your truck stab deep in the 14's :)
> > hee heee I'll keep my radials on and run ya ;-) !!
> >
> > Matt
> >
> >
> > -----Original Message Follows -----
> >
> >
> > From: Tim Berry [mailto:coolva1@home.com]
> > Sent: Tuesday, July 11, 2000 8:48 AM
> > To: dakota-truck@buffnet.net
> > Subject: DML: attn. Matt B. and Injectors installed... was Richmond
> > D'way
> >
> >
> > Matt... I think MPH will stay close to the same...
> >
> > My bro spun 1st and 2nd at the track on his first time, last run, and
> turned
> > a 14.4 @101
> > (normally 13.5 @ 105)
> >
> > btw, I installed a set of 24# injectors yesterday.. It seems to be
> catching
> > on (the puter)....
> > Now... When do I get to slap them slicks on my truck??? =-)
> >
> > I feel the injectors MAY have lost a little torque down low, and gave me
> > some extra HP, but I cant tell... it seems the speed-o-meter rises to 60
> in
> > a blink of the eye.... but... only VMP will tell me that =)
> >
> > Tim Berry
> > Chesapeake, VA
> >
> >
> > > Hey Wayne, once you get that rocket hooked up, say, in the 1.8-1.90
> range,
> > > hee heee, That would almost be 12's!! At any rate, mid 13's in a
truck
> > is
> > > flying!!
> > > That high MPH is a good indication of tire spin, I would bet that when
> you
> > > do hook up your MPH will be right around 100 mph even. Congrats!!
> > >
> > > Matt
> >
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:52:36 EDT