Thanks Terry. Marty (KRC Performance) is sending me the MSD harness. Hope
it works as good as the Accel one.
Ron
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Terry Herrin
Sent: Wednesday, July 12, 2000 4:47 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: MSD 6-a Mounting Location
"Ronald Wong" <ron-wong@home.com> wrote:
>On your MSD and coil is that the universal wiring harness that you used to
>connect everything? Are there complete instructions? I've just ordered
That's an Accel wiring harness, part number 140021AH . Yes, there are
instructions with wiring diagrams.
>mine so it should be here shortly. Any words of wisdom would be
>appreciated. I looked at your pictures on your website and will probably
I followed the diagrams that came with the ignition and had no
problems hooking everything up. I did buy some of that corrugated
plastic pipe to run the wires through as they passed across the top of
the radiator. Good luck!
Terry Herrin
99 FR CC R/T
14.769 @ 91.43
Wilmington, NC
http://users.isaac.net/therrin/dakota.html
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:52:36 EDT