Re: DML:fuel system pressure release

From: Andy Levy (andylevy@bigfoot.com)
Date: Mon Jul 17 2000 - 23:34:59 EDT

Oddly enough, that's what the Haynes manual recommends.

Mike Williams wrote:
>
> Mmmm.. even better way, remove the fuel pump relay and turn the truck over a
> couple times.
>
> Mike Williams
> 00 Blk R/T RC - ProCharged
>
> ----- Original Message -----
> From: "Jon Smith" <fast4x4@digivill.net>
> To: <dakota-truck@buffnet.net>
> Sent: Monday, July 17, 2000 9:50 PM
> Subject: Re: DML:fuel system pressure release
>
> > I take a peice of hose from a can of fix-a-flat and srew onto the schrader
> > valve on the fuel rail.. just have the open end of the tube sticking in a
> > cup or somethin before you screw it down....
> >
> >
> > Hi All,
> >
> > I just received my '99 FSM (compliments of eBay)and was looking
> > over the fuel system pressure release procedure on pp. 14-10 and
> > 14-11. I was wondering if this procedure needs to be followed to the
> > letter. TIA
> >
> > Chuck Robbins
> > '99 Dakota Sport
> > http://www.members.home.com/clrobbins/dakota.htm
> >
> >
> > --
> > Jon Smith
> > Raleigh, NC
> > fast4x4@digivill.net
> > www4.ncsu.edu/~jdsmith4
> >
> > BellSouth SUCKS!!!!
> > 

-- 
-andy

http://home.twcny.rr.com/andylevy/ --- andylevy@bigfoot.com 
-------------------------------------------------------------
"I spilled spot remover on my dog. He's gone now..." 
                  --- Steve Wright
-------------------------------------------------------------

This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:52:41 EDT