On Tue, 18 Jul 2000, Mark Kuzia wrote:
> NEED OVERDRIVE WITH 4.10 GEARS! Try 4000 rpm at 80mph without! I may go to a
> built A500 or A518.
>
Yeah, that's the major problem as I see it. The problem I have come
across regarding an A500 or A518 is that they are significantly more
expensive than the 727 or 904. I thought I might just go with a 727
then if the finances permit, I could add a Gear Vendors overdrive
later. (I'm not sure which would end up being more expensive in the
long run, but the 727 is definitely cheaper short term, and should be
stronger too.) Plus, in my particular application, I plan to cram
over 600 ponies through it, so I might not need such tall gears. I'll
just have to see what happens as it comes together I guess.
-Jon-
.---- Jon Steiger ----- jon@dakota-truck.net or jon@twistedbits.net ------.
| Affiliations: AOPA, DoD, EAA, NMA, NRA, SPA, USUA; Rec & UL Pilot - SEL |
| '92 Ram 150 4x4 V8, '96 Dakota V8, '96 Intruder 1400, '96 FireFly 447 |
`------------------------------ http://www.cs.fredonia.edu/~stei0302/ ----'
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:52:41 EDT