Looking on my specific model there is no rubber shielding that blocks any
air from getting in. SO my next best bet to cool down the engine is the
FlowKoolers. My question is, why hasn't the bigger auto manufacture caught
on to this devise?
-------------------------------------------
Steven St.Laurent
Test Engineer
Test Branch, GSD, MCTSSA
MARCORSYSCOM, USMC
760-725-2506 (DSN 365-2506)
Work:mailto:stlaurents@mctssa.usmc.mil
Home:mailto:saint1958@home.com
-----Original Message-----
From: Bernd D. Ratsch [mailto:bernd@texas.net]
Sent: Monday, July 24, 2000 8:47 AM
To: dakota-truck@buffnet.net
Subject: DML: Re: Reverse or Standard Rotate Water Pumps?
Is this what your looking for? (Specific for Dakota trucks)
http://www.packeton.com/flowkooler/dodgetruck/dakota.htm
----- Original Message -----
From: <brian.duffey@intelsat.int>
To: <dakota-truck@buffnet.net>
Sent: Monday, July 24, 2000 10:27 AM
Subject: DML: Reverse or Standard Rotate Water Pumps?
> Hey DML...
>
> If anyone can help me out with this quick question (either from FSM or
> looking at truck) I'd really appreciate it! (My truck is at home, so I
can't
> go out & check for myself)
>
> I need to order a new water pump, and so far the only
> aftermarket/performance pump for the Mag 318 is made by FlowKooler. Only
> problem is they list the pump for the 318 as a Reverse Rotation water
pump.
>
> I need to know if the stock (OEM) pump is a Standard rotation, or is the
OEM
> Water Pump a reverse rotation?
>
> Need this info for: '95 318, Auto w/ A/C
>
> Below is the excerpt from FlowKoolers page (and the link) about how to
tell
> the diff.
>
> http://www.packeton.com/flowkooler/catalog.htm
> " Compare the diagrams below. Water pump pulleys running on the inside
> surface of the belt indicate a Standard Rotation water pump (grooved side
of
> belt).
> Water pump pulleys running on the outside surface of the belt indicate a
> Reverse Rotation water pump (flat or smooth side of belt).
> Caution: Standard and Reverse Rotation Water Pumps are not
interchangeable.
> When the question arises, "Is this a standard or reverse rotation water
> pump?", the customer's own vehicle holds the clearest answer. Under the
hood
> on most late-model light trucks and automobiles, is a belt path diagram.
> Locate the water pump pulley on the diagram (on the front of the engine if
> you cannot find the diagram). Simply determine if the water pump is driven
> by the inside or outside of the belt. "
>
> If anybody has access to this info. I'd really appreciate the assistance!
>
> Thanks,
>
> Duff
> '95 SLT 4x4 CC 318 4spd/OD - 3.55 LSD
> MSD 6AL - MSD Blaster Coil
> MSD 8.5 wires - K&N FIPK - F&B Stage I TBI
> Mopar HiPo Comp - Thorley Headers - Gibson Catback Exhaust
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:52:47 EDT