Re: RE: Re: Roller Rockers

From: Bernd D. Ratsch (bernd@texas.net)
Date: Wed Aug 02 2000 - 12:15:33 EDT


Since the Magnum engines really don't make any more power above 5000 rpm,
you don't have to worry about the 5500+ RPM Kit. (Why they state that is
beyond me for a stock engine.)

I recommended it since it's a matched valvetrain replacement and is very
stable for normal street driving...definitely better than the stock setup.

- Bernd

----- Original Message -----
From: "Ronald Wong" <ron-wong@home.com>
To: <dakota-truck@buffnet.net>
Sent: Wednesday, August 02, 2000 10:34 AM
Subject: DML: RE: Re: Roller Rockers

> They have a kit including pushrods for$535 and one w/o for $422. They say
> the $535 one is for over 5500 RPM. Is this advisable or only for
full-race
> applications? Help me, Bernd....I know this subject has been discussed
many
> many times but the archives are not up. Thanks again.
>
> Ron
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net]On Behalf Of Bernd D. Ratsch
> Sent: Wednesday, August 02, 2000 7:33 AM
> To: dakota-truck@buffnet.net
> Subject: DML: Re: Roller Rockers
>
>
> 1.6:1 is the stock ratio and going up to 1.7:1 is (non technically
explained
> here) like going to a slightly larger lift cam. The roller design also
> reduces friction (and wear) which in turn provides more HP. I believe it
> was Sam who posted a 24HP gain from the 1.7:1 Rollers.
>
> Crower makes a complete kit (Rockers, Studs, Lock-Nuts, and Pushrods) that
> is a direct bolt on.
>
> - Bernd
>
> ----- Original Message -----
> From: "Ronald Wong" <ron-wong@home.com>
> To: <dakota-truck@buffnet.net>
> Sent: Wednesday, August 02, 2000 9:19 AM
> Subject: DML: Roller Rockers
>
>
> > What are my advantages to changing my roller rockers? Is it more for
> those
> > that are opting for SC's? Performance gains? 1.5 is stock so I see in
> > MOPAR parts book that 1.6 is the option. Someone, please explain how
this
> > ratio works....Bernd? Is there other parts that should be changed
because
> > of this change? e.g., lifters? Cost vs gains? Thanks all.
> >
> > Ron
> > 00 SLT QC 4X2 5.9 3.55 LSD
> >
> >
>
>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:53:13 EDT