Ok you HOME DEPOT junkies-enough with the home made brew and on to some Home
Base brew. Hehehehehehehehhee
-------------------------------------------
Steven St.Laurent
Test Engineer
Test Branch, GSD, MCTSSA
MARCORSYSCOM, USMC
760-725-2506 (DSN 365-2506)
Work:mailto:stlaurents@mctssa.usmc.mil
Home:mailto:saint1958@home.com
-----Original Message-----
From: Alex Harris [mailto:aharris@signcast.com]
Sent: Friday, August 04, 2000 1:52 PM
To: dakota-truck@buffnet.net
Subject: RE: DML: 2 homebrew K&N questions
Hey yeah, you're the guy who got me thinking I had to install the breather
somewhere! You and your bad 4.7 self. Ha ha! If you missed my other post,
I've got the 3.9 with the breather connected to the air hat -- hat stays on,
breather stays on, no relocation necessary.
I'm taking your idea for the insulted wrap for the AC lines, though, thanks
for that. Storm King (@Home Depot and Lowes) makes 15' rolls of 1/8" x 2"
self-adhesive foam insulation with the foil already on for $2.68. Find it in
the plumbing section.
- Alex
>
> I used a 90' bend rubber pipe fitting from ( I hate so say at this point
> hehe) Home Depot. Its a snug fit but works out just fine.
> There a photo on my web site. Here the link to K&N upgrade page..
> http://geocities.com/maldbnsf/K_N.html
>
> Have fun ;}
> Don Mallett
> Fort Worth, TX
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:53:16 EDT