Re: GenIII Wheels on a GenII, Attn. Kyle

From: Chuck Robbins (intense99dak@home.com)
Date: Thu Aug 10 2000 - 18:37:59 EDT


 Another link you might want to try is
http://www.intense99dak.com/carlos.htm I've seen Carlos' dak in
person and the rims are really sharp. He mentions a spacer was required
on his '94. His tires are 245/60. I'm not sure if there's rubbing or not in
tight turns or not.

Chuck Robbins
'99 Intense Blue Dakota Sport
www.intense99dak.com

>
> I get a little rubbing on mine at full lock. Strange as it seems, when
the
> wheel is cocked all the way to the left. Doesn't do it when it's to the
> right. I used tape style weights because the front is a pretty tight fit.
> Lots of room in the rear though.
>
> I found my wheels and tires at North Texas Take Off's in Hurst, Texas.
Cost
> me 450 bucks brand new!
>
> Hope that helps ya,
>
> Brett Forehand
> '94 Dakota CC Sport
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:53:22 EDT