Robertshaw or Jet is more precise. If you have a 180 that's hotter than 195
that's 10% or worse error. YECH!
Ron
00 SLT QC 4X2 5.9 46RE 3.55 LSD
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Gmblows@aol.com
Sent: Saturday, August 12, 2000 7:58 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: Re: BRAND THERMOSTAT 180
I used a Stant heavy duty 180 degree thermostat, it runs hotter
than the stock 195!
Results may vary (greatly)
<< *STANT*, have had one in my '97 for 3.5yrs, no problems.
L. John
Your Local *Real Hemi* Owner
Subject: DML: BRAND THERMOSTAT 180
> What brand of thermostat have you guys found to be the most reliable
to
> replace the 195 degree with? I have had bad luck with them in my old
Ricer
(5
> in 6 years) Don't want that with new 2001 DAK 4.7. It's not as easy to
> change. I have concidered putting wing nuts on the thermostat housing on
the
> ricer. Make a quick change out of it. LOL
> SEMI-HEMI-01
> >>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:53:23 EDT