On Tue, 15 Aug 2000 DICEMAN469@aol.com wrote:
> OK, I went back and re-read some of the stuff you guys sent me about this
> swap. I overlooked where Doug Myers says I can re-drill my flywheel to
> balance it to the 360. Through some research it seems that the flywheels are
> identical, just the balancing is different. Soooooo here's my question. What
> do I drill, where do i drill it, and if no one knows, who do I ask?? Please
> guys help me out, the engine comes on Thursday and if I can get everything
> properly planned, I may attempt an installation over the weekend.
Austin,
Expect the unexpected. Make sure you can do without your truck for a
couple of weeks. It probably won't take that long, but if it does,
you're covered. I'd be a bit wary of jumping into something of this
magnatude hastily. Plan it out, take your time, and good luck! :-)
-Jon-
.---- Jon Steiger ----- jon@dakota-truck.net or jon@twistedbits.net ------.
| Affiliations: AOPA, DoD, EAA, NMA, NRA, SPA, USUA; Rec & UL Pilot - SEL |
| '92 Ram 150 4x4 V8, '96 Dakota V8, '96 Intruder 1400, '96 FireFly 447 |
`------------------------------ http://www.cs.fredonia.edu/~stei0302/ ----'
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:53:26 EDT