I'm not sure if the Hella's are the same design as my old ones, but check
out http://www.intense99dak.com/airhorns.htm I mounted them between
the fender and wheelwell. That location worked well and I didn't have
any problems.
Chuck Robbins
'99 Intense Blue Dakota Sport
www.intense99dak.com
> So where is everyone installing the trumpets?
>
> Ron
> 00 SLT QC 4X2 5.9 46RE 3.55 LSD
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net]On Behalf Of W. Jack Hilton III
> Sent: Wednesday, August 16, 2000 9:52 PM
> To: dakota-truck@buffnet.net
> Subject: Re: DML: Hella air horn & compressor install
>
>
>
> So what do you guys want to know about this horn ? I work for Hella.
>
> These horns are made in Spain, and are very very good sellers. We do
> recommend using all of the pieces we supply with the kit, but as long as
> you are using some sort of relay, it should work fine.
>
> Biggest problem with installing is finding a place to put the trumpets.
>
> At 11:02 PM 8/16/00 -0400, you wrote:
> >I have the same hella horns, And I doid not use the relay. It works just
> fine
> >and LOUD too...
>
> @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
>
> W. Jack Hilton III
>
> Newnan , GA
>
> HEMI@charter.net
>
> http://webpages.charter.net/hemi/jbd1.html
>
> ICQ#: 32611901
>
> AOL Instant Messenger: "DwnSth69"
>
> @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:53:28 EDT