Course you could change your Gen III CC to a Gen III QC and it will fit
perfectly underneath either of the back seats.
Ron
00 SLT QC 4X2 5.9 46RE 3.55 LSD
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Shawn Villaire
Sent: Thursday, August 17, 2000 9:08 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: Re: DML Digest V4 #2375
I had the same problem with mine. I ended up "wedging" my 10 disc changer
between the rear drivers side seat and the wall of the extended cab. There
is a gap about 4 or 5 inches wide between the two(where the cup holder is)
My sony changer fits snugly when I put it horizontial. Hasn't moved yet.
--- rsuter@bizfon.com wrote:
>
>
> Where have others mounted CD changers in GenIII CC SLTs? I attempted to
> find an
> appropriate spot for a 10 disk unit last night, but it doesn't fit in the
> glove
> box or under the seats. I suspect the center "fold-up" console is a bad
> idea. I
> eyeballed the rear "hatches" but they looked too small also.
>
> thanks,
>
> Rick
>
>
=====
00 CC 4X4 Sport, 4.7l,flowmaster cat-back, k&n homebrew open air filter,180
t-stat,autolite 3923's,more to come....
__________________________________________________
Do You Yahoo!?
Send instant messages & get email alerts with Yahoo! Messenger.
http://im.yahoo.com/
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:53:28 EDT