My Haynes manual says to torque the tranny pan bolts to 150 in-lbs. Is it
just me or does that seem really excessive, and would casue the gasket to
tear. I torqued them yesterday to 40 in-lbs and from the looks of my
garage floor, it's leaking.
I'm gonna stick in on the lift at work tomm and retorque the
bolts. Should I go with the 150 in-lbs? I really don't want to tear the
gasket and have to drop the pan again.
-- _______________________ Jon Smith Raleigh, NC fast4x4@digivill.net www4.ncsu.edu/~jdsmith4
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:53:32 EDT