Screw the Crane Cam, get a hughes Engines cam!
HER0814AL, http://www.hughesengines.com/cams/magnumlist.asp
Mark Kuzia
flyboy01@mediaone.net
http://people.mw.mediaone.net/flyboy01/home.html
1995 Dakota 13.79 @ 99.52 mph
360ci, 5-spd, 4.11 LS, Ram-air
----- Original Message -----
From: "mike d." <miggitymike@juno.com>
To: <dakota-truck@buffnet.net>
Sent: Wednesday, August 23, 2000 11:05 PM
Subject: Re: DML: Vipertruck Status
> Hey Austin..
>
> since you're havin' it rebuilt, go all out man! Get some MP valve
> springs, put a cam in that MoFo (2030 Crane is a good blower grind) port
> them heads, bore it .030 over, put a double roller timing chain on it,
> and whatever else you find interesting =)
>
> as for the 518, look up Level 10. They make (pricey) stuff to really
> build up a 518, also check out TCI, and talk to Marty at KRC
> performance... he knows everything =)
>
> -mike d.
>
> miggitymike@juno.com
> http://surf.to/Project13s
> PROJECT 13's ----> slammed 88 Dakota, 360 Magnum swap in progress!!
>
> "support your local economy... lower your truck"
>
>
> On Tue, 22 Aug 2000 12:24:12 EDT DICEMAN469@aol.com writes:
> > Just in case anyone is interested in this ongoing project...I'm
> > getting the
> > 360 totally rebuilt complete with forged pistons for about $1150.
> > I'll be
> > bringing it in tomorrow and they tell me about a 7 day turnaround.
> > Pretty
> > impressive if you ask me.
> > The intercooler is supposed to get here today as per UPS
> > tracking. I'll
> > probably start work on that before the V8 comes back.
> > I bought polished MP valve covers last night to make this baby
> > look
> > perrrty once I get it back. 1.7 rockers will be going in as soon as
> > I get
> > around to calling crower to find out if I can buy the rockers
> > individually (I
> > just need four to use my V6 kit on the V8). Throw some stronger
> > valve springs
> > in there as well, turn up the msd and rev the shit out of it, lol.
> > I'm looking into a 4 barrel TB and intake manifold right now,
> > hopefully
> > it will come through. If not, I'll use the stock stuff until I come
> > up with a
> > different plan.
> > I'm going to try out the 5 speed and see how it holds up. But
> > I'm going
> > to hold onto the 518 and see if I can find ANYONE who knows ANYTHING
> > about
> > this thing as to where and what I can do to it to make it
> > bulletproof. No
> > once's coughing up part numbers, and I won't put it in in it's
> > current
> > slushbox state.
> >
> > As for me, happy birthday to me!!
> >
> > -Austin
> > Vipertruck
>
> ________________________________________________________________
> YOU'RE PAYING TOO MUCH FOR THE INTERNET!
> Juno now offers FREE Internet Access!
> Try it today - there's no risk! For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:53:38 EDT