I did an online calculator, I have an estimated 400 HP at the flywheel =)
Running the 24# injectors causes some lean spots in the throttle, but 90-95%
is fine...
Does the 24# injectors support 400HP with a blower?
___________________
Tim Berry
Chesapeake, VA
97 CC, 4x2, auto, 318
Best 1/4: 14.10@96.8
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
> Almost forgot to mention:
>
> On my V6, taking the HP increase from the blower put me at approximately
> 250HP at the crank...that requires 24# injectors.
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> Subject: DML: RE: RE: Which Injectors Then??????
>
> According to the formulas from RC Engineering, unless you're pushing
280+HP
> (Flywheel) from a V8, the 19# should work just fine. You can use the 19#
> FMS "High Flow" Injectors if you need to "push" them a little bit.
>
> - Bernd
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:25 EDT