Are the part numbers for the Borg Warner Brass Distributor cap different for
the V8 and V6?
>From an old email Bernd has stated the part number for his V6 as C273. I
hope this is correct as I have one in my garage yet to be installed. I
assume the C274 is for the V8. Correct?
Thanks,
Ken
>-----Original Message-----
>From: Ronald Wong [mailto:ron-wong@home.com]
>Sent: Sunday, September 03, 2000 7:21 PM
>To: dakota-truck@buffnet.net
>Subject: DML: RE: Rotor and rotor cap and ignition wiring for 5.9
>
>
>C'mon Jon, let's get the FAQ database built.
>
>1) Wiring 8 - 8.5 mm wires, MSD, Magnecor, Jacobs, Accel, etc.
>
>2) Ignition - MSD 6A (Bernd has the MSD Digital-6 but he's got
>NOS and SC)
>
>3) Coil - MSD or Accel, I have the Blaster SS
>
>4) If you order the MSD ignition you should get the universal wiring
>harness, makes things a little easier.
>
>5) Plugs - Most folks on the DML use Autolite 3923's.
>
>6) Distributor Cap and Rotor - Brass - P/N C274 and D223
>
>Beyond ignition:
>
>7) Throttle Body - QuickD
>
>8) HP PCM - Mopar
>
>9) Headers - Positive Performance
>
>Etc etc etc etc etc....$$$$$$$$$$$$$$$$$$$$
>
>Ron
>00 SLT QC 4X2 5.9 46RE 3.92 LSD
>For modifications see my DML Profile
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:27 EDT