on 9/7/00 7:39 PM, Terry Herrin at therrin@isaac.net wrote:
> David Axmann <bckpack@earthlink.net> wrote:
>> I'm getting ready to upgrade to the MSD 6A. I know that lots of DMLers
>> use the Accel super coil. I know that this is pretty much an oem,
>> epoxy filled, coil. My question is, is anybody using an MSD or other
>> coil? Everybody touts the universal harness as it allows easy changing
>
> I'm running an MSD Blaster SS coil with the MSD 6A ignition.
>
>> back to the stock ignition but I would also like to keep the stock coil
>> if I wanted to switch back for any problems. I'm not against using the
>> Accel as my coil, I'd just mount it in another spot. All things
>> considered, is one coil better than another?
>
> I don't know, but I'm very satisfied with the 6A and Blaster SS
> combination. You can see on my web page how I mounted both, and there
> is a dyno sheet showing the 10hp gain over stock at 3500rpm. I can
> switch from MSD back to stock in less than a minute.
>
> Terry Herrin
> 99 FR CC RT
> 14.769 @ 91.43
> Wilmington, NC
> Dakota R/T Club,Executive Board,SE Region
> http://users.isaac.net/therrin/dakota.html
>
Hi Terry,
I just installed mine what do you gap your plugs at....?
Thanks
Scott Q
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:29 EDT